Tinyproxy is a light-weight HTTP/HTTPS proxy daemon for POSIX operating systems. Designed from the ground up to be fast and yet small, it is an ideal solution for use cases such as embedded deployments where a full featured HTTP proxy is required, but the system resources for a larger proxy are unavailable.
- Proxie 2 4 1 – Http Debugging Proxy Server Configuration
- Proxie 2 4 1 – Http Debugging Proxy Server Settings
- Proxie 2 4 1 – Http Debugging Proxy Server Ip
Tinyproxy is distributed using the GNU GPL license (version 2 or above).
Features
Tinyproxy has a small footprint and requires very little in the way of system resources. The memory footprint tends to be around 2 MB with glibc, and the CPU load increases linearly with the number of simultaneous connections (depending on the speed of the connection). Thus, Tinyproxy can be run on an older machine, or on a network appliance such as a Linux-based broadband router, without any noticeable impact on performance.
External NTLM proxy authentication for SSL; Version 2.4.2. 23 September 2003. External proxy server support. Essential for debugging secure websites. Preliminary HTTP/1.1 support – keep-alive support over SSL. Improved performance, especially for large transfers.
Tinyproxy requires only a minimal POSIX environment to build and operate. It can use additional libraries to add functionality though.
Tinyproxy allows forwarding of HTTPS connections without modifying traffic in any way through the CONNECT method (see the ConnectPort directive).
A list of free proxy servers from across the internet. All proxy servers on the list are currently working, and have been tested for speed, location, and anonymity. Export to txt, csv, or API. Proxy lists, 🕵️ free list of anonymous proxy servers: HTTPS, Socks4, Socks5, txt-export ip-port and API-access — hidemy.name. For end-to-end TLS 1.2 communications you should ensure that the clients of the device or application sending requests to the Duo proxy and the upstream authenticating LDAP server are all only permitting TLS 1.2 as well. Windows users should encrypt all passwords and secrets in the authproxy.cfg file. Web proxy tool add-on for XrmToolBox to log all HTTP(S) traffic between your computer and CDS environment and/or any other internet portal. Inspect traffic, update on the fly, and fiddle with request/response. Current version: 1.22.5.2020 (beta) Key features:. Override HTTP(s) Responses and Requests on the fly and directly in the text area with JS.
Tinyproxy supports being configured as a transparent proxy, so that a proxy can be used without requiring any client-side configuration. You can also use it as a reverse proxy front-end to your websites.
Using the AddHeader directive, you can add/insert HTTP headers to outgoing traffic.
If you're looking to build a custom web proxy, Tinyproxy is easy to modify to your custom needs. The source is straightforward, adhering to the KISS principle. Disk utility erase mac. As such, it can be used as a foundation for anything you may need a web proxy to do.
Tinyproxy has privacy features which can let you configure which HTTP headers should be allowed through, and which should be blocked. This allows you to restrict both what data comes to your web browser from the HTTP server (e.g., cookies), and to restrict what data is allowed through from your web browser to the HTTP server (e.g., version information).
Using the remote monitoring facility, you can access proxy statistics from afar, letting you know exactly how busy the proxy is.
You can configure Tinyproxy to control access by only allowing requests from a certain subnet, or from a certain interface, thus ensuring that random, unauthorized people will not be using your proxy.
With a bit of configuration (specifically, making Tinyproxy created files owned by a non-root user and running it on a port greater than 1024), Tinyproxy can be made to run without any special privileges, thus minimizing the chance of system compromise. Furthermore, it was designed with an eye towards preventing buffer overflows. The simplicity of the code ensures it remains easy to spot such bugs.
Downloads
- On Red Hat Enterprise Linux, or its derivatives such as CentOS, install Tinyproxy from the EPEL repository by running yum install tinyproxy.
- On Fedora, install Tinyproxy by running yum install tinyproxy.
- On Debian and derived distributions, run apt-get install tinyproxy to install Tinyproxy.
- For openSUSE run: zypper in tinyproxy
- Arch users can install the Tinyproxy package from the community repository. Run pacman -S tinyproxy to install it.
- FreeBSD, OpenBSD or NetBSD users can use the pkg_add utility to install the tinyproxy package.
- Mac OS X users can check MacPorts to see if the Tinyproxy port there is recent enough.
If you feel that the Tinyproxy binary package in your operating system is not recent, please contact the package maintainer for that particular operating system. If this fails, you can always compile the latest stable version from source code.
We distribute Tinyproxy in source code form, and it has to be compiled in order to be used on your system. Please see the INSTALL file in the source code tree for build instructions. The current stable version of Tinyproxy is available on the releases page. The Tinyproxy NEWS file contains the release notes. You can verify the tarball using its PGP signature. You can also browse the older releases of Tinyproxy.
We use Git as the version control system for the Tinyproxy source code repository. To get a copy of the Tinyproxy repository, use the command:
git clone https://github.com/tinyproxy/tinyproxy.git
Documentation
NAME
tinyproxy.conf - Tinyproxy HTTP proxy daemon configuration file
SYNOPSIS
tinyproxy.conf
DESCRIPTION
tinyproxy(8) reads its configuration file, typically stored in `/etc/tinyproxy/tinyproxy.conf` (or passed to Tinyproxy with -c on the command line). Navicat premium essentials 12 1 19 15. This manpage describes the syntax and contents of the configuration file.
The Tinyproxy configuration file contains key-value pairs, one per line. Lines starting with `#` and empty lines are comments and are ignored. Keywords are case-insensitive, whereas values are case-sensitive. Values may be enclosed in double-quotes (') if they contain spaces.
The possible keywords and their descriptions are as follows:
The user which the Tinyproxy process should run as, after the initial port-binding has been done as the `root` user. Either the user name or the UID may be specified.
The group which the Tinyproxy process should run as, after the initial port-binding has been done as the `root` user. Either the group name or the GID may be specified.
The port which the Tinyproxy service will listen on. If the port is less than 1024, you will need to start the Tinyproxy process as the `root` user.
By default, Tinyproxy listens for connections on all available interfaces (i.e. it listens on the wildcard address `0.0.0.0`). With this configuration parameter, Tinyproxy can be told to listen only on one specific address.
This allows you to specify which address Tinyproxy will bind to for outgoing connections to web servers or upstream proxies.
If this boolean parameter is set to `yes`, then Tinyproxy will bind the outgoing connection to the IP address of the incoming connection that triggered the outgoing request.
The maximum number of seconds of inactivity a connection is allowed to have before it is closed by Tinyproxy.
This parameter controls which HTML file Tinyproxy returns when a given HTTP error occurs. It takes two arguments, the error number and the location of the HTML error file.
This parameter controls the HTML template file returned when an error occurs for which no specific error file has been set.
This configures the host name or IP address that is treated as the `stat host`: Whenever a request for this host is received, Tinyproxy will return an internal statistics page instead of forwarding the request to that host. The template for this page can be configured with the `StatFile` configuration option. The default value of `StatHost` is `tinyproxy.stats`.
This configures the HTML file that Tinyproxy sends when a request for the stathost is received. If this parameter is not set, Tinyproxy returns a hard-coded basic statistics page. See the STATHOST section in the tinyproxy(8) manual page for details.
Note that the StatFile and the error files configured with ErrorFile and DefaultErrorFile are template files that can contain a few template variables that Tinyproxy expands prior to delivery. Examples are '{cause}' for an abbreviated error description and '{detail}' for a detailed error message. The tinyproxy(8) manual page contains a description of all template variables.
This controls the location of the file to which Tinyproxy writes its debug output. Alternatively, Tinyproxy can log to syslog -- see the Syslog option.
When set to `On`, this option tells Tinyproxy to write its debug messages to syslog instead of to a log file configured with `LogFile`. These two options are mutually exclusive.
Sets the log level. Messages from the set level and above are logged. Wondershare recoverit 8 5 3 20. For example, if the LogLevel was set to Warning, then all log messages from Warning to Critical would be output, but Notice and below would be suppressed. Allowed values are:
Critical (least verbose)
Error
Warning
Notice
Connect (log connections without Info's noise)
Info (most verbose)
This option controls the location of the file where the main Tinyproxy process stores its process ID for signaling purposes.
Setting this option to `Yes` tells Tinyproxy to add a header `X-Tinyproxy` containing the client's IP address to the request.
This option allows you to set up a set of rules for deciding whether an upstream proxy server is to be used, based on the host or domain of the site being accessed. The rules are stored in the order encountered in the configuration file and the LAST matching rule wins. The following forms for specifying upstream rules exist:
upstream type host:port turns proxy upstream support on generally.
upstream type user:pass@host:port does the same, but uses the supplied credentials for authentication.
upstream type host:port 'site_spec' turns on the upstream proxy for the sites matching `site_spec`.
`type` can be one of `http`, `socks4`, `socks5`, `none`.
upstream none 'site_spec' turns off upstream support for sites matching `site_spec`, that means the connection is done directly.
The site can be specified in various forms as a hostname, domain name or as an IP range:
name matches host exactly
.name matches any host in domain 'name'
. matches any host with no domain (in 'empty' domain)
IP/bits matches network/mask
IP/mask matches network/mask
Note that the upstream directive can also be used to null-route a specific target domain/host, e.g.: `upstream http 0.0.0.0:0 '.adserver.com'`
Tinyproxy creates one thread for each connected client. This options specifies the absolute highest number processes that will be created. With other words, only MaxClients clients can be connected to Tinyproxy simultaneously.
The `Allow` and `Deny` options provide a means to customize which clients are allowed to access Tinyproxy. `Allow` and `Deny` lines can be specified multiple times to build the access control list for Tinyproxy. The order in the config file is important. If there are no `Allow` or `Deny` lines, then all clients are allowed. Otherwise, the default action is to deny access. The argument to `Allow` or `Deny` can be a single IP address of a client host, like `127.0.0.1`, an IP address range, like `192.168.0.1/24` or a string that will be matched against the end of the client host name, i.e, this can be a full host name like `host.example.com` or a domain name like `.example.com` or even a top level domain name like `.com`. Note that by adding a rule using a host or domain name, a costly name lookup has to be done for every new connection, which could slow down the service considerably.
Configure HTTP 'Basic Authentication' username and password for accessing the proxy. How to access android phone files on pc. If there are any entries specified, access is only granted for authenticated users.
Configure one or more HTTP request headers to be added to outgoing HTTP requests that Tinyproxy makes. Note that this option will not work for HTTPS traffic, as Tinyproxy has no control over what headers are exchanged.
RFC 2616 requires proxies to add a `Via` header to the HTTP requests, but using the real host name can be a security concern. If the `ViaProxyname` option is present, then its string value will be used as the host name in the Via header. Otherwise, the server's host name will be used.
When this is set to yes, Tinyproxy does NOT add the `Via` header to the requests. This virtually puts Tinyproxy into stealth mode. Note that RFC 2616 requires proxies to set the `Via` header, so by enabling this option, you break compliance. Don't disable the `Via` header unless you know what you are doing.
Tinyproxy supports filtering of web sites based on URLs or domains. This option specifies the location of the file containing the filter rules, one rule per line.
Rules are specified as POSIX basic regular expressions (BRE), unless FilterExtended is activated. Comment lines start with a `#` character.
Example filter file contents:
If this boolean option is set to `Yes` or `On`, filtering is performed for URLs rather than for domains. The default is to filter based on domains.
Proxie 2 4 1 – Http Debugging Proxy Server Configuration
If this boolean option is set to `Yes`, then extended POSIX regular expressions are used for matching the filter rules. The default is to use basic POSIX regular expressions.
Proxie 2 4 1 – Http Debugging Proxy Server Settings
If this boolean option is set to `Yes`, then the filter rules are matched in a case sensitive manner. The default is to match case-insensitively.
The default filtering policy is to allow everything that is not matched by a filtering rule. Setting `FilterDefaultDeny` to `Yes` changes the policy do deny everything but the domains or URLs matched by the filtering rules.
If an `Anonymous` keyword is present, then anonymous proxying is enabled. The headers listed with `Anonymous` are allowed through, while all others are denied. If no Anonymous keyword is present, then all headers are allowed through. You must include quotes around the headers.
Most sites require cookies to be enabled for them to work correctly, so you will need to allow cookies through if you access those sites.
Example: Sniper app 1 4 12.
This option can be used to specify the ports allowed for the CONNECT method. If no `ConnectPort` line is found, then all ports are allowed. To disable CONNECT altogether, include a single ConnectPort line with a value of `0`.
Configure one or more ReversePath directives to enable reverse proxy support. With reverse proxying it's possible to make a number of sites appear as if they were part of a single site.
If you uncomment the following two directives and run Tinyproxy on your own computer at port 8888, you can access example.com, using http://localhost:8888/example/.
Proxie 2 4 1 – Http Debugging Proxy Server Ip
When using Tinyproxy as a reverse proxy, it is STRONGLY recommended that the normal proxy is turned off by setting this boolean option to `Yes`.
Setting this option to `Yes`, makes Tinyproxy use a cookie to track reverse proxy mappings. If you need to reverse proxy sites which have absolute links you must use this option.
The URL that is used to access this reverse proxy. The URL is used to rewrite HTTP redirects so that they won't escape the proxy. If you have a chain of reverse proxies, you'll need to put the outermost URL here (the address which the end user types into his/her browser). If this option is not set then no rewriting of redirects occurs.
Support
- Feel free to report a new bug or suggest features via github issues.
- Tinyproxy developers hang out in #tinyproxy on irc.freenode.net.
